パワーエレクトロニクス
ソリューション
テクノロジー
プロダクト

オプトエレクトロニクス
蛍光灯関連
LED関連
フラッシュスコープ関連

会社概要
プライバシーポリシー
お問い合わせ
サイトマップ

スタッフコラム

WebEDI(電子商取引)


TOP
ISO9001 ISO14001
LED関連 > LEDデータ

 






上の表は弊社LED照明に使用している主なLEDの分光特性です。 その他の波長の照明についても製作可能です。
弊社営業までご相談下さい。
The above table shows the spectral characteristics of the main LEDs used in our LED lighting systems.
Of course we also support other types of LEDs. Please feel free to consult us.



 

LEDは他の光源と比較して応答速度が早く、ON/OFF
してのご使用に有効です。一つのワークに対して複
数の照明の切換、高速移動するワークに対する撮像
などに威力を発揮します。また、必要時のみの点灯
による長寿命化、発光時間が制御できるストロボ照
明としてのご使用も可能です。


LEDs have a faster response speed than other light sources, an
effective characteristic for applications in which frequent ON/OFF
cycles are expected. They also provide significant effects for
changeover of multiple lights for one work and image capturing of a
fast-moving work. Moreover, LED light sources provide a longer
service life if activated only when necessary, as well as allow the
uses as a flashing light system with variable lighting intervals.

 
点灯時間の短いストロボ照明の場合、LEDに流す電流
を大きくすることができるので高照度化が可能です。下
記の表は、白色LEDを連続光とストロボ光で発光させ、
その光量をフォトセンサにて電圧に変換した比較デー
タです。連続発光時に比べ、ストロボ発光時には2倍
以上になります。
(一部の商品はストロボ対応しておりません。)

In the flashing mode with a short lighting interval, LEDs can accept a
larger amount of current, resulting in higher luminance. The following
table shows the light intensity data, detected by a photo sensor and
converted in voltage, for a white LED used in the continuous lighting
mode and that used in the flashing mode. Compared to the light
intensity of the continuously lighting LED, the flashing LED provides
more than 2times as large as amount of light.
(Some models do not support the flashing mode.)





反射集光型LEDライン照明 KDDLシリーズの赤(R)と白(W)の寿命特性です。
The following is the service life curves of the reflective light-concentration LED line light system, KDDL series R (red LED) and W (white LED).





ラインカメラを用いた反射集光型LEDライン照明 KDDL-300W(白色)の発光分布
Light emission distribution of reflective light-concentration LED line light system with a line camera, KDDL-300W (white LED)

  発光面から100mmの位置に拡散板を
設置し、透過にて光量分布を測定。


The light intensity distributions are measured
with the transmitting light that passes through
a diffusion panel located 100 mm distant from
the lighting face.

面照明 KDAM-120/120W(白色)の発光分布
Light emission distribution of surface lighting KDAM120/120W
(white)

  KDAM-120/120W の均一データ
Uniform data of KDAM-120/120W
  左記の各ポイントの均一度データです。 分布は下記の
ようになります。

These are the data representing the uniformity at each point shown to
the left.



Kyoto Denkiki Co.,Ltd.